22 AWG Enameled Copper Magnet Wire

$0.90 per 10 feet

Minimum order of 100 feet sold in 10 foot increments.
One continuous spool of wire for the total number of feet ordered.

Spool Price
SKU: 22-AWG Category:

Description

22 AWG enameled copper magnet wire.
Manufactured by Essex.
Heavy Build ( Two Coats ) of Insulation type: modified polyester basecoat and an improved polyamideimide topcoat.
High temperature Class: 200ºC (392ºF).
Approximately .0276 inch diameter.

My primary market for my wire is for Crystal Radio Wire, Loop Antenna Wire and Ham Radio Wiring applications.

Some uses besides Crystal Radio Coils.

Generators and Alternators
Motors AC, DC, Hermetic and Fractional Integral HP Motors
Power Tools, Solenoids
Dry Type Transformers, Class 105 through 200
Electronics, All Types of Coils, Class 105 Through 200
Arts & Crafts
Inductors

Additional information

Gauge

22 AWG

Aproximate Outer Diameter

.0276 inches

Manufacturer

Essex

Reviews

There are no reviews yet.

Be the first to review “22 AWG Enameled Copper Magnet Wire”

Your email address will not be published. Required fields are marked *

Have a question or something to discuss?


Customer
kkyle
November 17, 2016

Is all of this sites magnet wire insulation of the type that can be removed by a soldering iron and without scraping the wire to tin it? The description indicates a 200 degree rating. I have used a match to burn off the insulation on magnet wire in the past and then cleaned it up with some fine emery or crocus cloth.

Support
Mike Lowe
November 17, 2016

I’ve not had any luck soldering the magnet wire without first scraping. I typically use a couple of swipes across some very fine sandpaper.